Addressable Panel Lpcb Fire Alarm Panel with Printer

• Customization: Available
• Production Capacity: 1000pieces/Month

Product Description

LPCB EN54 Standard Approved Addressable Fire Alarm Control Panel





Product Introduction

The purpose of the AW-FP300 Fire Alarm Control Panel (FACP) is to monitor input signals, give indications and possibly activate outputs as programmed. It is designed to comply with EN 54-2 & EN 54-4 with qualities of simple installation, operation and easy maintenance.
The AW-FP300 panel is an addressable fire detection panel with 1 loop of 324 addressable points and expansion capabilities. It is compatible with other peripherals made by ASENWARE with its own protocol.

Product Features

1. Up to 324 addresses on one loop
2. An easy to read, 4.3'' color screen LCD with a resolution of 480×272
3. Zone indication and control panel(ZCP) for 32 zones gives a quick indication of the location of an alarm
4. Record capacity of 1000 historical events for each of historical fire, historical fault and historical operation
5. An independently programmable conventional sounder circuit output
6. Integral power supply and battery
7. Integral printer
8. Flexible and intuitive cause and effect programming on front panel
9. Zone test, point test and module start/stop testing facilitate the commissioning
10. U-disk interface makes the load and save of configuration or historical data convenient for system commissioning and maintenance
11. Hierarchy management with three access levels 
12. Anti-tamper protection by a key lock
13. CAN bus for interconnection of up to 20 FACPs and RS485 for connection with up to 30 fire indicating panels per FACP

Power Supply

Mains supply	230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A
Mains fuse	T3.15AL250V
Operating voltage	18.5 ~ 30VDC
Recommended mains cable	Screened or standard/black mains cable, cable size 0.75mm2
Power rating	Imax.a=1.2A; Imax.b=2.6A; Imin=0.65A
Max. charging current	1.2A
Max. battery supply current	4A (when the Mains is disconnected)
Battery capacity, type and recommended model	Max. capacity 2×12V/17Ah; Min. capacity 2×12V/12Ah  VRLA. PS-12170 for 17Ah (Power-sonic), PS12120 for 12Ah (Power-sonic)
Max. internal resistance of battery	1.5Ω
Battery fuse	F8AL250V
Recommended battery cable	14AWG
Quiescent current (full loaded)	< 0.4A

 

 Outputs

S.C. Out (+, -)	Output voltage	18.5 ~ 30VDC
	Max. output current	0.5A
	Fuse rating	F1AL250V
	End of line resistor	4K7
	Recommended type of cable	Plain unscreened cable, 1.5mm2
	Cable diameter	1mm2 ~2mm2
	Transmission distance	≤1500m
	Max. number of sounders @50mA	20
F.P.E. Out (+, -)  F.A. Out (+, -)	Output voltage	18.5 ~ 30VDC
	Max. output current	0.5A
	Fuse rating	F1AL250V
	End of line resistor	4K7
	Recommended type of cable	Plain unscreened cable,1.5mm2
	Cable diameter	1mm2 ~2mm2
	Transmission distance	≤1500m
Fault Out  (NC, COM, NO)	Contact capacity	30VDC at 2A, 125VAC at 0.5A
	Recommended type of cable	Plain unscreened cable,1.5mm2
	Cable diameter	1mm2 ~ 2mm2
24VK (+, -)	Output voltage	18.5 ~ 30VDC
	Max. output current	0.6A
	Fuse rating	F1AL250V
	Recommended type of cable	Plain unscreened cable,1.5mm2
	Cable diameter	1mm2 ~2mm2

 

 Input

Class change (+, -)	Input mode	Passive
	Cable resistance	≤500Ω
	Recommended type of cable	Plain unscreened cable, 1.5mm2
	Cable diameter	1mm2 ~2mm2

 

 Loop

Loop Out (+, -) Loop In (+, -)	Output voltage	16.5 ~ 30VDC, pulse
	Output current	0 ~0.3A
	Loop type	Class A
	Recommended type of cable	Screened or unscreened twisted-pair, 1.5mm2
	Transmission distance	≤1000m
	Cable diameter	1mm2 ~2mm2

 

 Network Communication

 

RS-485	Max. number of FIPs	30
	Transmission rate	9600 bps
	Recommended type of cable	Screened or unscreened twisted-pair, 1mm2
	Transmission distance	≤1000m
	Cable diameter	1mm2 ~5mm2
CAN	Max. number of panels	20
	Transmission rate	Optional: 10K, 20K, 50K and 100K bps
	Recommended type of cable	Screened or unscreened twisted-pair, 1mm2
	Transmission distance	≤1000m
	Cable diameter	1mm2 ~5mm2

 

Company Profile




ASENWARE is the fire alarm system and fire suppression system manufacturer and whole fire safety solution provider since 2005.

Driven by a commitment to sound operations, ongoing innovation, and open collaboration, we have established a competitive fire safety products line include addressable fire alarm system, conventional fire alarm system, central monitoring emergency light system, fire telephone and emergency audio system, fire pump, fire hose and gas suppression system.

Delivery







Our Services

1.OEM / ODM services.
2.Professional technical team.
3.Offer Free technical support whenever you need
4.Two year warranty and technical maintenance

FAQ 

Q1: Are you manufacturer?
A: (yes)

Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
FM200:  two weeks working day
Fire pump: 25 days

Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after payment received.

Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.

Q5: Do you offer OEM service?
A: Yes, we can design the things according to your request.