Factory Price Lpcb Approved Conventional Fire Alarm Control Panel

Shenzhen Asenware Test and Control Technology Co., Ltd.
  • Audited Supplier
  • 14 yrs

Contact Supplier

Still deciding? Get samples of $ !
Request Sample

Product Highlights

  • EN54 Standard Compliance: Designed based on EN54 part 2&4 standard for reliable fire detection.
  • Expandable Zone Capacity: Modular design allows expansion from 1 to 32 zones easily.
  • Flexible Power Supply: Supports 110VAC or 240VAC mains supply with 24VDC/5VDC outputs.
  • Comprehensive Signal Outputs: Features FIRE/FAULT relay outputs, 2 sounder circuits, and GSM SMS option.
  • Advanced Battery Protection: Automatically cuts off battery if voltage drops below 21VDC to protect mains.
  • User-Friendly Control: Includes dedicated buttons for RESET, SILENCE, and EVACUATE functions.
  • Robust Fault Monitoring: Monitors line faults for open circuit, short circuit, and detector removal.
  • Fast Delivery Time: Standard delivery time is 15 days for efficient project scheduling.

Product Images of Factory Price Lpcb Approved Conventional Fire Alarm Control Panel

Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel pictures & photos
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel pictures & photos
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel pictures & photos
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel pictures & photos
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel pictures & photos
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel pictures & photos
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
  • Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
  • Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
    Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
  • Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
    Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
  • Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
    Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
  • Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
    Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
  • Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
    Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
  • Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
    Factory Price Lpcb Approved Conventional Fire Alarm Control Panel

Find Similar Products

Product Description

1-32 zone conventional fire detection control panel

Introduction:

The AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel



1 AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.
2 It is modularized design, the panel can expend from 1 zone to 32 zones easily.
3 It has 2 level control mode by a lock
4 It has 24VDC and 5VDC power supply output.
5 It has FIRE and FAULT signal output.
6 It has 2 general sounders output.
7 Each zone has 1 circuit detectors input.
8 Each zone can be disable by a button.
9 It has RESET button to reset the panel.
10 It has SILENCE button to stop BUZZER and SOUNDERS.
11 It has EVACUATE button to start a manual fire alarm immediately.
12 It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
13 It has an optional GSM module for fire alarm by SMS.
14 It is economic, user-friendly and easy maintenance.
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel

Parameters:
ITEM 1Zone panel 2Zone panel 4-8 Zone panel 12-32 Zone panel
Model No. AW-CFP2166-01 AW-CFP2166-02 AW-CFP2166-04-8 AW-CFP2166-12-32
Power specification
 
Mains supply voltage 110VAC or 240VAC
Internal power supply 27.2VDC
Total output current limited 500mA @ 240VAC 500mA @ 240VAC 3A @ 240VAC 3A @ 240VAC
Main supply monitor for fault Yes
Battery protection for low voltage Yes
Batteries (default configuration) 12V2AH*2
Detector circuit specification
 
Number of circuit 1 2 4-16 4-32
Line fault monitor for open circuit Yes
Line fault monitor for short circuit Yes
Line fault monitor for detector removal Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device 6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Detector continuity diodes Silicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault)
Call point resistor value 470 to 680 Ω, 0.225 or 0.5 watt
Maximum number of smoke/heat detectors per zone 20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.
Maximum number of manual call points per zone No limit
Sounder circuit specification
 
Number of general circuits 2
End of line resistor value 6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Line fault monitor for open circuit Yes
Line fault monitor for short circuit Yes
Outputs fused AT 400mA
Maximum number of bells @ 20mA of each sounder output 20
Fuses
 
Battery fuse 1.5A F 20mm
Sounder outputs 500mA F 20mm
Fire and fault output
 
Output type NC and NO relay
Maximum current 100mA
Connection block
 
Largest acceptable conductor size 2.5mm2
Smallest acceptable conductor size 0.75mm2
Size and weight
 

 
Dimensions(mm) 272*200*70mm 320*231*90mm 395X502X124 362X565X124
Weight (without batteries) 4kg 5kg 7kg 8kg
Weight (with batteries) 5.8kg 6.8kg 9.6kg 12.5kg

Show board for conventional fire alarm system

Factory Price Lpcb Approved Conventional Fire Alarm Control Panel
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel

Company
Factory Price Lpcb Approved Conventional Fire Alarm Control Panel



Factory Price Lpcb Approved Conventional Fire Alarm Control Panel


Contact us

Swing
 
 
 
 
 
 
 
 
 

About the Supplier

This supplier has been audited by CTI. Verify the report on the official CTI website with ID "QIP-ASR242972". Items marked "verified" are certified.

Shenzhen Asenware Test and Control Technology Co., Ltd.
Shenzhen Asenware Test and Control Technology Co., Ltd.
Shenzhen Asenware Test and Control Technology Co., Ltd.
Shenzhen Asenware Test and Control Technology Co., Ltd.
Shenzhen Asenware Test and Control Technology Co., Ltd.
Shenzhen Asenware Test and Control Technology Co., Ltd.
Shenzhen Asenware Test and Control Technology Co., Ltd.
Shenzhen Asenware Test and Control Technology Co., Ltd.

About Our Factory & Business Background

Address
4 / F, 10 Xingye Road, Torch Development Zone, Zhongshan, Guangdong, China
Terms of Payment
LC, T/T, D/P, PayPal, Western Union, Small-amount payment, Money Gram
International Commercial Terms(Incoterms)
FOB, EXW, CIF
Average Lead Time
Peak Season Lead Time: within 15 workdays
Off Season Lead Time: within 15 workdays
Nearest Port
Zhongshan

Our Production Capability & Technical Expertise

Main Products
Fire Alarm System, Smoke Detector, Fire Alarm Control Panel, Fire Alarm, FM200, Fire Pump, Flame Detector, Fire Hose Reel, Emergency Light System, Beam Smoke Detector

Our Industry Experience & Global Business Record

Export Year
2005-06-01
Main Markets
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe

FAQ

What is the maximum number of zones supported?
The panel supports a modular design that can be expanded from 1 zone up to 32 zones.
Does the panel comply with international standards?
Yes, the AW-CFP2166 series is designed based on the EN54 part 2&4 standard.
What power supply options are available?
It accepts 110VAC or 240VAC mains supply and provides 24VDC and 5VDC power outputs.
How does the battery protection work?
When battery voltage drops below 21VDC, the battery is automatically cut off until mains power is restored.
Can the system send alerts via SMS?
Yes, an optional GSM module is available for sending fire alarm notifications via SMS.
What are the delivery terms?
The standard delivery time is 15 days, with peak and off-season lead times within 15 workdays.
What payment methods are accepted?
We accept T/T, Western Union, LC, D/P, PayPal, Money Gram, and small-amount payments.
What fault monitoring features are included?
The system monitors for line open circuits, short circuits, and detector removal (with End of Line Monitor Unit).

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now