En54 Standards Addressable Fire Alarm Control Panel

Product Description

LPCB Approved Addressable Fire Alarm Control Panel

 

 

Product Description

 

INTRODUCTION

The purpose of the AW-FP300 Fire Alarm Control Panel (FACP) is to monitor input signals, give indications and possibly activate outputs as programmed. It is designed to comply with EN 54-2 & EN 54-4 with qualities of simple installation, operation and easy maintenance.
The AW-FP300 panel is an addressable fire detection panel with 1 loop of 324 addressable points and expansion capabilities. It is compatible with other peripherals made by ASENWARE with its own protocol.
 
PRODUCT FEATURES
1. Up to 324 addresses on one loop
2. An easy to read, 4.3'' color-screen LCD with a resolution of 480×272
3. Zone indication and control panel(ZCP) for 32 zones gives a quick indication of the location of an alarm
4. A record capacity of 1000 historical events for each of historical fire, historical fault and historical operation
5. An independently programmable conventional sounder circuit output
6. Integral power supply and battery
7. Integral printer
8. Flexible and intuitive cause and effect programming on the front panel
9. Zone test, point test, and module start/stop testing facilitate the commissioning
10. U-disk interface makes the load and saves of configuration or historical data convenient for system commissioning and maintenance
11. Hierarchy management with three access levels 
12. Anti-tamper protection by a key lock
13. CAN bus for interconnection of up to 20 FACPs and RS485 for connection with up to 30 fire indicating panels per FACP
 
Parameters

Power Supply

Mains supply	230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A
Mains fuse	T3.15AL250V
Operating voltage	18.5 ~ 30VDC
Recommended mains cable	Screened or standard/black mains cable, cable size 0.75mm2
Power rating	Imax.a=1.2A; Imax.b=2.6A; Imin=0.65A
Max. charging current	1.2A
Max. battery supply current	4A (when the Mains is disconnected)
Battery capacity, type and recommended model	Max. capacity 2×12V/17Ah; Min. capacity 2×12V/12Ah  VRLA. PS-12170 for 17Ah (Power-sonic), PS12120 for 12Ah (Power-sonic)
Max. internal resistance of battery	1.5Ω
Battery fuse	F8AL250V
Recommended battery cable	14AWG
Quiescent current (full loaded)	< 0.4A

 

 Outputs

S.C. Out (+, -)	Output voltage	18.5 ~ 30VDC
	Max. output current	0.5A
	Fuse rating	F1AL250V
	End of line resistor	4K7
	Recommended type of cable	Plain unscreened cable, 1.5mm2
	Cable diameter	1mm2 ~2mm2
	Transmission distance	≤1500m
	Max. number of sounders @50mA	20
F.P.E. Out (+, -)  F.A. Out (+, -)	Output voltage	18.5 ~ 30VDC
	Max. output current	0.5A
	Fuse rating	F1AL250V
	End of line resistor	4K7
	Recommended type of cable	Plain unscreened cable,1.5mm2
	Cable diameter	1mm2 ~2mm2
	Transmission distance	≤1500m
Fault Out  (NC, COM, NO)	Contact capacity	30VDC at 2A, 125VAC at 0.5A
	Recommended type of cable	Plain unscreened cable,1.5mm2
	Cable diameter	1mm2 ~ 2mm2
24VK (+, -)	Output voltage	18.5 ~ 30VDC
	Max. output current	0.6A
	Fuse rating	F1AL250V
	Recommended type of cable	Plain unscreened cable,1.5mm2
	Cable diameter	1mm2 ~2mm2

 

 Input

Class change (+, -)	Input mode	Passive
	Cable resistance	≤500Ω
	Recommended type of cable	Plain unscreened cable, 1.5mm2
	Cable diameter	1mm2 ~2mm2

 

 Loop

Loop Out (+, -) Loop In (+, -)	Output voltage	16.5 ~ 30VDC, pulse
	Output current	0 ~0.3A
	Loop type	Class A
	Recommended type of cable	Screened or unscreened twisted-pair, 1.5mm2
	Transmission distance	≤1000m
	Cable diameter	1mm2 ~2mm2

 

 Network Communication

 

RS-485	Max. number of FIPs	30
	Transmission rate	9600 bps
	Recommended type of cable	Screened or unscreened twisted-pair, 1mm2
	Transmission distance	≤1000m
	Cable diameter	1mm2 ~5mm2
CAN	Max. number of panels	20
	Transmission rate	Optional: 10K, 20K, 50K and 100K bps
	Recommended type of cable	Screened or unscreened twisted-pair, 1mm2
	Transmission distance	≤1000m
	Cable diameter	1mm2 ~5mm2

Related Products

     

TRANSPORTATION


Certifications

 

 

FAQ

Q1: How about the quality of the products?
A: We produce every product with good quality materials, and test carefully to make sure stable quality before shipment.

Q2: Can I have a sample order?
B: Yes, Of course you can . we welcome sample order for your testing and checking products quality.Mixed samples are avaliable.

Q3: What is the shipping time?
C: Small Qty order needs 3-5 working days, big Qty order usually needs 10-5 working days after
payments arriving. That's depends on order Qty.

Q4: How to proceed the order if I have logo to print?
D: We will prepare artwork for visual confirmation at first, if the color and position are alright,we
will make print Logo sample from silk print factory and take picture for you to comfire before mass production.

Company Information

ASENWARE LTD

We are manufacturer of fire alarm and fire suppression system since 2005, our headquarter is in London,UK, with factory Shenzhen China and Zhongshan factory.

We keep our best service for our customers and have a rich experienced engineer team to design and install for overseas projects.

We are professional do fire alarm products about 15 years in China. Our fire safety products, solutions, and services are used in over 100 countries.
 

Product range:
1. Addressable fire alarm system
2. Conventional fire alarm system
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet

CONTACT INFORMATION

Contact:Iris Huang