| Customization: | Available |
|---|---|
| Type: | Temperature Sensor Probe |
| Anti-theft Alarm System Approach: | Active |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction:
AW-D102 is addressable photo-electronic heat detector uses a state
of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most addressable fire alarm panel.
The addressable rate of rise heat detector uses thermal component to detect the temperature changing in the environment. It can enable fire alarm when the temperature difference achieved the setting rate of rise temperature value. It can also enable fire alarm when the absolute temperature value reach the setting fixed value. It has a stable and reliable working performance.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
The addressable detector that initiated the alarm condition will have its red LED and relays latched until rest by panel.
| Model No. | AW-D102 |
| Operating Voltage Range | 18V-28VDC |
| Alarm Current | ≤3mA |
| Work Current | ≤2.5mA |
| Temperature | -10ºC to 50ºC |
| Fix Temperature Range | 57ºC A2R |
| Rate of Rise Alarm | 7.1ºC/5S A2R |
| Standard Number Ref | EN 54-5:2000 |
| Terminals Connection | No 6: Remote Indicator+ |
| No 3: Remote Indicator- | |
| No 2: Loop IN+ | |
| No 5: Loop IN- |
){kind=link}