Fire dtection system fire alarm smoke and heat combined detector
AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.
It is modularized design, the panel can extend from 1 zone to 32 zones easily.
It has 2 level control mode by a lock
It has 24VDC and 5VDC power supply output.
It has FIRE and FAULT signal output.
It has 2 general sounders output.
Each zone has 1 circuit detectors input.
Each zone can be disable by a button.
It has RESET button to reset the panel.
It has SILENCE button to stop BUZZER and SOUNDERS.
It has EVACUATE button to start a manual fire alarm immediately.
It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
It has an optional GSM module for fire alarm by SMS.
It is economic, user-friendly and easy maintenance.
|Operating Voltage Range:||9 to 28VDC Volts Non-polarized|
|Standby Current:||≤60µA @ 24 VDC|
|Maximum Alarm Current (LED on: )||≤30mA @ 24 VDC|
|Operating Humidity Range:||10% to 93% Relative Humidity, Non-condensing|
|Operating Temperature Range:||14°F to 120°F (-10°C to 49°C)|
|Fixed Temperature Rating:||135°F (57°C)|
|Rate of Rise Detection:||Responds to greater than 15°F/min|
|Height:||2.2 (55 mm) installed in Base|
|Weight:||5.5 oz. (155 g)|