China Factory 4 Zone Control Panel for Fire Alarm System

• Customization: Available
• Type: Fire Alarm Host
• Function: Networked
• Model NO.: AW-FP2166
• Usage: Fire, Smoke
• Certification: CE
• Alarm Volume (within 1m): ≥110dB
• Networking Mode: GSM Dial-up
• Receive Frequency: 433.92MHz
• Wiring Mode: Sub-Line System
• Transport Package: Carton Box
• Specification: 51/50/36
• Trademark: Asenware
• Origin: China
• HS Code: 8537109090
• Production Capacity: 20000PCS/Month

Product Description

China Factory 4 Zone Control Panel for fire alarm system

Product introduction:

* AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.

* It is modularized design, the panel can expend from 1 zone to 32 zones easily.

* It has 2 level control mode by a lock.

* It has 24VDC and 5VDC power supply output.

* It has FIRE and FAULT signal output.

* It has 2 general sounders output.

* Each zone has 1 circuit detectors input .

* Each zone can be disable by a button.

* It has RESET button to reset the panel.

* It has SILENCE button to stop BUZZER and SOUNDERS.

* It has EVACUATE button to start a manual fire alarm immediately.

* It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.

* It has an optional GSM module for fire alarm by SMS .

* It is economic, user-friendly and easy maintenance.

 

ITEM	1 Zone panel	2 Zone panel	4-8 Zone panel	4-32 Zone panel
Model No.	AW-CFP2166-01	AW-CFP2166-02	AW-CFP2166-04-08	AW-CFP2166-04-16
Power Specification
Mains supply voltage	110VAC or 240VAC
Internal power supply	27.2VDC
Total output current limited	500mA @ 240VAC		3A @ 240VAC
Main supply monitor for fault	Yes
Battery protection for low voltage	Yes
Batteries (default configuration)	12V2AH*2
Detector Circuit Specification
Number of circuit	1	2	4-8	4-32
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Line fault monitor for detector removal	Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device	6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Detector continuity diodes	Silicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault)
Call point resistor value	470 to 680 Ω, 0.225 or 0.5 watt
Maximum number of smoke/heat detectors per zone	20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.
Maximum number of manual call points per zone	No limit
Sounder Circuit Specification
Number of general circuits	2
End of line resistor value	6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,gold)
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Outputs fused AT	400mA
Maximum number of bells @ 20mA of each Sounder output	20
Fuses
Battery fuse	1.5A F 20mm
Sounder outputs	500mA F 20mm
Fire Output
Output type	NC and NO relay
Maximum current	100mA
Connection Block
Largest acceptable conductor size	2.5mm2
Smallest acceptable conductor size	0.75mm2
Size and Weight
Dimensions(mm)	272X200X70	320X231X90	395X502X124	362X565X124
Weight (without batteries)	4kg	5kg	7kg	8kg
Weight (with batteries)	5.8kg	6.8kg	19.6kg	12.5kg

 
Company Information:

ASENWARE is the fire alarm system and fire suppression system manufacturer and whole fire safety solution provider since 2005.

Driven by a commitment to sound operations, ongoing innovation, and open collaboration, we have established a competitive fire safety products line include addressable fire alarm system, conventional fire alarm system, central monitoring emergency light system, fire telephone and emergency audio system, fire pump, fire hose and gas suppression system.

Our fire safety products ,solutions and services are used in over 100 countries.
With over 200 employees work in United Kingdom-Marketing Center, China-R&D and Supply Chain Center and Bangladesh-Manufacture
Center, ASENWARE is committed to design and manufacture the best fire safety products to reduce the risk of fire, and support theworld to be more safe and more comfortable.









Exhibition:



 

_{Our Services:}

* Over 15 years' experience.
* Prompt response.
* OEM & ODM available.
* Support factory inspection.
* Standard qulity control system.
* Different choices of payment and delivery.
* Independant R&D dept, designing dept,to meet your special need.
* Whole set of technical supports and with abroad projects experience.
* We are manufacturer, offer better price better service.
* Direct control on materials, production status, quality checking.
* Sample order, customized order, bulk order are supported.
* Reliable after-sales service, with one year waranty.

Contact:
Lily Huang
Shenzhen Asenware Test&Control Technology Co.,Ltd
Website:asenware.en.made-in-china.com
Factory Add: 4F,10#, Xingye Rd., Huoju District, Zhongshan City, Guangdong
Marketing Center AddR: 26H, Building D, Shihong Garden, Fanshen Rd, Baoan, Shenzhen