Lpcb Certified Addressable Fire Alarm Control Panel

Product Description

Product Description

LPCB certified addressable fire alarm control panel

Introduction

The purpose of the AW-FP300Fire Alarm Control Panel (FACP) is to monitor input signals, give indications and possibly activate outputs as programmed. It is designed to comply with EN 54-2 with qualities of simple installation, operation and easy maintenance. 
The AW-FP300panel is an addressable fire detection panel with 1 loop of 324 addressable points and expansion capabilities.It is compatible with other peripherals made by ASENWARE with its own protocol.






Features

The AW-FP300 single loop 32 zone fire alarm control panel offers the following features: 
1. Up to 324 addresses on one loop
2. An easy to read, 4.3'' color screen LCD with a resolution of 480×272
3. Zone indication and control panel(ZCP) for 32 zones gives a quick indication of the location of an alarm
4. Record capacity of 1000 historical events for each of historical fire, historical fault and historical operation
5. An independently programmable conventional sounder circuit output
6. Integral power supply and battery
7. Integral printer
8. Flexible and intuitive cause and effect programming on front panel
9. Zone test, point test and module start/stop testing facilitate the commissioning
10. U-disk interface makes the load and save of configuration or historical data convenient for system commissioning and maintenance
11. Hierarchy management with three access levels 
12. Anti-tamper protection by a key lock
13. CAN bus for interconnection of up to 20 FACPs and RS485 for connection with up to 30 fire indicating panels per FACP

Parameters
 

Power supply
Mains supply				230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A
Mains fuse				T3.15AL250V
Operating voltage				18.5 ~ 30VDC
Recommended mains cable				Screened or standard/black mains cable, cable size 0.75mm2
Power rating				Imax.a=1.2A; Imax.b=2.6A; Imin=0.65A
Max. charging current				1.2A
Max. battery supply current				4A (when the Mains is disconnected)
Battery capacity, type and recommended model				Max. capacity 2×12V/17Ah; Min. capacity 2×12V/12Ah  VRLA. PS-12170 for 17Ah (Power-sonic), PS12120 for 12Ah (Power-sonic)
Max. internal resistance of battery				1.5Ω
Battery fuse				F8AL250V
Recommended battery cable				14AWG
Quiescent current (full loaded)				< 0.4A
Outputs
S.C. Out (+, -)		Output voltage				18.5 ~ 30VDC
Max. output current				0.5A
Fuse rating				F1AL250V
End of line resistor				4K7
Recommended type of cable				Plain unscreened cable, 1.5mm2
Cable diameter				1mm2 ~2mm2
Transmission distance				≤1500m
Max. number of sounders @50mA				20
F.P.E. Out (+, -)  F.A. Out (+, -)		Output voltage				18.5 ~ 30VDC
Max. output current				0.5A
Fuse rating				F1AL250V
End of line resistor				4K7
Recommended type of cable				Plain unscreened cable, 1.5mm2
Cable diameter				1mm2 ~2mm2
Transmission distance				≤1500m
Fault Out  (NC, COM, NO)		Contact capacity				30VDC@2A, [email protected]
Recommended type of cable				Plain unscreened cable, 1.5mm2
Cable diameter				1mm2 ~ 2mm2
24VK (+, -)	Output voltage				18.5 ~ 30VDC
Max. output current			0.6A
Fuse rating			F1AL250V
Recommended type of cable			Plain unscreened cable, 1.5mm2
Cable diameter			1mm2 ~2mm2
Input
Class change (+, -)	Input mode				Passive
Cable resistance			≤500Ω
Recommended type of cable			Plain unscreened cable, 1.5mm2
Cable diameter			1mm2 ~2mm2
Loop
Loop Out (+, -)  Loop In (+, -)	Output voltage				16.5 ~ 30VDC, pulse
Output current			0 ~0.3A
Loop type			Class A
Recommended type of cable			Screened or unscreened twisted-pair, 1.5mm2
Transmission distance			≤1000m
Cable diameter			1mm2 ~2mm2
Network communication
RS-485	Max. number of FIPs				30
Transmission rate			9600 bps
Recommended type of cable			Screened or unscreened twisted-pair, 1mm2
Transmission distance			≤1000m
Cable diameter			1mm2 ~5mm2
CAN	Max. number of panels				20
Transmission rate			Optional: 10K, 20K, 50K and 100K bps
Recommended type of cable			Screened or unscreened twisted-pair, 1mm2
Transmission distance			≤1000m
Cable diameter			1mm2 ~5mm2
Physical dimensions
Approx. Dimensions of the panel (W×H×D)			430×560×170mm
Approx. weight (without battery)			14kg
Operating conditions
Temperature range: 0°C~45°C; Max relative humidity: 95% (40°C ±2°C, no condensation)

Company Information

Asenware, is the fire alarm system and fire suppression system manufacturer and whole fire safety solution provider since 2005

Driven by a commitment to sound operations, ongoing innovation, and open collaboration, we have established a competitive fire safety products line include addressable fire alarm system, conventional fire alarm system, central monitoring emergency light system, fire telephone and emergency audio systemm, fire pump, fire hose and gas suppression system.

Our fire safety products, solutions and services are used in over 100 countries.

With over 200 employees work in United Kingdom-Marketing center, China-R&D and Supply Chain center and Bangladesh-Manufacture center, Asenware is committed to design and manufacturer the best fire safety products to reduce the risk of fire, and support the world to be more safe and more comfortable.

Product range

Addressable fire alarm system
Conventional fire alarm system (2166 series)
FM200 gas suppression system (2159 series)
Fire pump
Fire hose/ hose reel and cabinet
ABC powder/ CO2 fire extinguisher
Emergency light system



Certificates




Service

1) OEM & ODM service: YES
2) Technical support and After-sale service: YES
3) Warranty: 1 YEAR
4) Delivery Time: 3 - 5 days after payment received
5) Shipping: delivery by air, ship or DHL, FEDX etc. Express for your order

Contact