Aw-Cfp2166 Asenware Conventional Fire Alarm Control Panel En54

• Customization: Available
• Type: Industry Alarm
• Signal Transmission: Wired Alarm
• Model NO.: AW-CFP2166
• Working Mode: Active
• Certification: CE, ISO
• Application: Indoor
• Working Principle: Electro-Optical Type
• Transmission Mode: Cable
• Alarm Volume (within 1m): ≥100dB
• Receive Frequency: 315MHz
• Color: Red /White/Grey /Black
• Battery: 12V 2ah 2PCS
• Weight: 9kg
• Zones: 1 to 32 Zone
• Capacity: 20PCS Detector
• Nature: Conventional
• Design: OEM ODM
• Certificate: CE ISO9001
• Wire: 2 Bus
• Installation: Wall Amount
• Transport Package: Shipment by Air by Express Sea Shipment
• Trademark: ASENWARE
• HS Code: 8531100000
• Production Capacity: 10000 Pieces/Month

Product Description

AW-CFP2166 Asenware conventional fire alarm control panel EN54 
1. AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.
2. It has 2 level control mode by a lock
3. It has 24VDC and 5VDC power supply output.
4.  Each zone has 1 circuit detectors input .
5.  Each zone can be disable by a button.
6. It is modularized design, the panel can extend from 1 zone to 32 zones easily.
7. It has FIRE and FAULT signal output and 2 general sounders output.
8. It has RESET button to reset the panel  and SILENCE button to stop BUZZER and SOUNDERS.
9. It has EVACUATE button to start a manual fire alarm immediately.
10. It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
11. It has an optional GSM module for fire alarm by SMS .
12. It is economic, user-friendly and easy maintenance.
 

ITEM	1Zone panel	2Zone panel	4-8Zone panel	4-32 Zone panel
Mains supply voltage	110VAC or 240VAC
Internal power supply	27.2VDC
Total output current limited	500mA @ 240VAC	500mA @ 240VAC	3A @ 240VAC	3A @ 240VAC
Main supply monitor for fault	Yes
Battery protection for low voltage	Yes
Number of circuit	1	2	4-16	4-32
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Line fault monitor for detector	Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device	6.8k Ω,5% tolerance, 0.25W (colour code-blue,grey,red,grey, red, gold)

AW-CFP 2166 the whole system
Production picture


 Package picture