• Aw-Csh832 Asenware Conventional Fire Alarm Combined Smoke and Heat Detector with Strobe Sounder
  • Aw-Csh832 Asenware Conventional Fire Alarm Combined Smoke and Heat Detector with Strobe Sounder

Aw-Csh832 Asenware Conventional Fire Alarm Combined Smoke and Heat Detector with Strobe Sounder

Operating Voltage Range: 9 to 28 VDC Volts Non-Polarized
Standby Current: ≤120μ a@24VDC
Fix Temperature Alarm: 57° C (135° F) A1r
Rate of Rise Alarm: 7.1° C/5s A1r
Height: 48.2 mm Installed in Bas
Diameter: 99.45 mm
Customization:
Diamond Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
AW-CSH832
Alarm Current
≤20mA
Certificate
ISO9001/Ce/RoHS
Transport Package
Carton
Trademark
Asenware
Origin
Zhongshan
HS Code
853110000
Production Capacity
10000 Pieces/Month

Product Description

AW-CSH832 Asenware conventional fire alarm combined smoke and heat detector with strobe sounder

Aw-Csh832 Asenware Conventional Fire Alarm Combined Smoke and Heat Detector with Strobe Sounder

Introduction:

1. GENERAL DESCRIPTION
The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel. Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a temperature heat detector.

Operating Voltage Range 9 to 28 VDC Volts Non-polarized
Standby Current ≤120μ A@24VDC  
Maximum Alarm Current (LED on)

≤15mA@24VDC
(1K Ohm current-limiting resistance)

Operating Humidity Range ≤95%RH(40°C±2°C) Relative Humidity, Non-condensing
Operating Temperature Range -10° C to 50° C (14° F to 122° F)
Smoke Alarm Sensitivity 1.06± .26%FT
Fix temperature Alarm 57° C (135° F) A1R
Rate of rise Alarm 7.1° C/5S A1R
Height 48.2 mm installed in Base
Diameter 99.45 mm

Our company
Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.
Aw-Csh832 Asenware Conventional Fire Alarm Combined Smoke and Heat Detector with Strobe Sounder
Aw-Csh832 Asenware Conventional Fire Alarm Combined Smoke and Heat Detector with Strobe Sounder


 

Product range:
1. Addressable fire alarm system(FP100 series,2189,2100 series)
2. Conventional fire alarm system(2166 series)
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet

Aw-Csh832 Asenware Conventional Fire Alarm Combined Smoke and Heat Detector with Strobe Sounder
Certification
Aw-Csh832 Asenware Conventional Fire Alarm Combined Smoke and Heat Detector with Strobe Sounder

Exhibition
Aw-Csh832 Asenware Conventional Fire Alarm Combined Smoke and Heat Detector with Strobe Sounder
Contact us

Asenware Ltd
 
Address:701, Bd 8, Dongfangming Industry Zone, Dabao Rd., Baoan, Shenzhen, China, Zip Code :518101
 

Company website: http://asenware.en.made-in-china.com

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Diamond Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company
Plant Area
>2000 square meters
Management System Certification
ISO 9001