Break glass manual fire alarm call point:
Fire alarm manual call point AW-AMC2166-1 8. Coding method: It can realize online coding with the help of a coder and without the necessity of disassembling the bus (however, the equipment must be powered off). Address codes 1 to 324 are available for selectionTelephone jack: Two-wire fire telephone jack (equipped with a standard 6.3 single-track audio connector). Starting part: A plastic pressing sheet that may be used repeatedly. It can be manually reset with a special tool after being pressed. Starting mode: Press the pressing sheet manually...Indicator: The red ALARM indicator will blink in the inspection status or remain lit in the alarm status; The PHONE indicator will blink when a fire telephone loop is connected, otherwise it will be out. Matched host machine: Fire alarm control panel (such as AW-CFP2166)
AW-CMC2166-1 conventional break glass manual call point is designed to be used with an intelligent fire alarm control system. If it is activated after a fire is manually confirmed, an alarm signal will be sent to a fire alarm control system. The manual call point is tested with a key, and do not leave the test key with the manual call point after testing.
Asenware conventional break glass call point technical parameters
|
Executive standard |
GB19880-250 |
Operating voltage |
24V (pulse modulation) |
Operating current |
<300µA |
Weight |
162g |
Wiring method |
nonpolar two-bus system |
Operating enviroment |
Indoor |
temperature |
-10°C~+50°C |
Relative humidity |
≤95% |
Certifications
Our company
ASENWARE is the fire alarm system and fire suppression system manufacturer and whole fire safety solution provider since 2005.
Driven by a commitment to sound operations, ongoing innovation, and open collaboration, we have established a competitive fire safety products line include addressable fire alarm system, conventional fire alarm system, central monitoring emergency light system, fire telephone and emergency audio system, fire pump, fire hose and gas suppression system.
Our fire safety products ,solutions and services are used in over 100 countries.
Exhibition
FAQ
Q1: Are you manufacturer?
A: (yes)
Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
FM200: two weeks working day
Fire pump: 25 days
Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after payment received.
Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
Q5: Do you offer OEM service?
A: Yes, we can design the things according to your request.