CE Approved Conventional UV IR flame detector
The device is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response. It is fast and capable to detecting the ultraviolet (UV) rays
Emitted by a burning substance and is used in high hazard applications such as petrochemical plants, munitions factories and other areas where flammable or explosive liquids or solids are handled or stored. The flame sensor adopts an ultraviolet photosensitive 60mmm tube, with qualities of highly sensitive, reliable, dust-resistant, corrosion proof and moisture-resistant, therefore is not sensitive in sunlight, dust, oil, tolerance of fume, and humidity. Set in a standard calibration to detect a flames at a distance of 25 meters, which flame created by 2Kg ethanol in a Container of Base 33cmX33cm, Height 5cm.
INSTALLATION
NOTE: All wiring must conform to applicable local
Codes, ordinances, and regulations.
Mounting Indoor Wall or Ceiling Products
1. Attach mounting base to ceiling or wall.
2. Connect field wiring to terminals:
Terminal 1: Relay Output-COM
Terminal 2: Relay Output-NO/NC (default NO)
Terminal 3: DC Power -
Terminal 4: DC Power +
3. To attach product to mounting base.
4. Secure product by tightening the two mounting screws
In the front of the product housing
5. The detector can be connected with Security alarm
Panel as Figure3. Relay output signal can be changed
From Normal Close (NC) to Normal Open (NO) by Jump
JP1 on the PCB board.
| Operating Voltage Range |
12 to 30 VDC Volts |
| Standby Current |
≤10 mA @ 24 VDC |
| alarm current |
180~290nm |
| Detection Angleml |
110 degree |
Detection Sensitivity
|
Grade I, 25m@flame (Container 33cmX33cm,Height 5cm with 2Kg ethanol ) |
| Relay Contact Loado |
1A@DC24Vol |
| Normal Status |
LED blinking in 5 seconds interval |
| Alarm Statusnd |
LED lit steady |
| Protection rating |
IP32 |
Operating Humidity Range
|
10% to 93% Relative Humidity, Non-condensing
|
Operating Temperature Range
|
-10°C to 50°C (14°F to 122°F) |
Height
|
1.8 (45 mm) installed in Base |
| Diameter |
4.0 (103 mm) |
| Weight |
5.4 oz. (153g) |
Our company
ASENWARE is the fire alarm system and fire suppression system manufacturer and whole fire safety solution provider since 2005.
Driven by a commitment to sound operations, ongoing innovation, and open collaboration, we have established a competitive fire safety products line include addressable fire alarm system, conventional fire alarm system, central monitoring emergency light system, fire telephone and emergency audio system, fire pump, fire hose and gas suppression system.
Our fire safety products ,solutions and services are used in over 100 countries.
Audited Supplier 
){kind=link}
){kind=link}