1-32 Loop 1-32 Zone Conventional Fire Alarm System Control Panel

• Type: Industry Alarm
• Signal Transmission: Wired Alarm
• Working Mode: Active
• Application: Indoor
• Working Principle: Electro-Acoustic Style
• Zones: 1-32
• Model NO.: AW-CFP2166-1
• Mains Supply Voltage: 110VAC/240VAC
• Internal Power Supply: 27.2VDC
• Total Output Current Limited: 3A @ 240VAC
• Batteries (Default Configuration): 12V2ah*2
• Main Supply Monitor for Fault: Yes
• Battery Protection for Low Voltage: Yes
• Number of Circuit: 12V2ah*2
• Number of General Circuits: 2
• Colour: White and Black
• Transport Package: EPE Inside, Carton Outside
• Specification: CE
• Trademark: Asenware
• Origin: Guangdong, China
• HS Code: 8531100000
• Production Capacity: 100000PCS/Year

Product Description

 1-32 Loop 1-32 Zone Conventional Fire Alarm System Control Panel

1. AW-CFP2166 series conventional fire alarm panel is designed based on EN54 part 2&4 standard.
2. It is modularized design, the panel can expend from 1 zone to 32 zones easily.
3. It has 2 level control mode by a lock
4. It has 24VDC and 5VDC power supply output.
5. It has FIRE and FAULT signal output.
6. It has 2 general sounders output.
7. Each zone has 1 circuit detectors input.
8. Each zone can be disable by a button.
9. It has RESET button to reset the panel.
10. It has SILENCE button to stop BUZZER and SOUNDERS.
11. It has EVACUATE button to start a manual fire alarm immediately.
12. It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
13. It has an optional GSM module for fire alarm by SMS.
14. It is economic, user-friendly and easy maintenance.

Parameters 

ITEM	1 Zone panel	2 Zone panel	4 Zone panel	8 Zone panel	12-32 Zone panel
Model No.	AW-CFP2166-01	AW-CFP2166-02	AW-CFP2166-04	AW-CFP2166-08	AW-CFP2166-12-32
Power specification
Mains supply voltage	110VAC or 220VAC
Internal power supply	27.2VDC
Total output current limited	500mA @ 240VAC		3A @ 220VAC
Main supply monitor for fault	Yes
Battery protection for low voltage	Yes
Batteries (default configuration)	12V2.3AH*2
Detector circuit specification
Number of circuit	1	2	4	4-8	12-32
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Line fault monitor for detector removal	Yes, if End of Line Monitor Unit fitted in place of End of Line Resistor
End of Line device	6.8k Ω,5% tolerance, 0.5-1W (colour code-blue,grey,red,gold)
Detector continuity diodes	Silicon 1N4001 or Schottky type (required if End of Line Monitor Unit fitted to give Detector Removal Fault
Call point resistor value	470 to 680 Ω, 0.5 or 1 watt
Maximum number of smoke/heat detectors per zone	20 (based on a total detector current of 2mA, each detector consuming 100μA).Note: if End of Line Monitor Unit is fitted, for correct operation maxmum voltage drop must not exceed 12 volts.
Maximum number of manual call points per zone	No limit
Sounder circuit specification
Number of general circuits	2
End of line resistor value	6.8k Ω,5% tolerance, 0.5-1W (colour code-blue,grey,red,gold)
Line fault monitor for open circuit	Yes
Line fault monitor for short circuit	Yes
Outputs fused AT	600mA
Maximum number of bells @ 50mA of each Sounder output	12			30
Fuses
Battery fuse	1.85A resettable fuse
Sounder outputs	400mA F 20mm		600mA resettable fuse	750mA resettable fuse
Fire output
Output type	NC and NO relay
Maximum current	100mA
Connection block
Largest acceptable conductor size	2.5mm2
Smallest acceptable conductor size	0.75mm2
Size and weight
Dimensions(mm)	272X200X70	320X231X90	315*250*90	430X390X140	640X390X150
Weight (with batteries)	5.5kg	7kg	7kg	9kg	13kg

Related products

Our company
Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.

Product range
1. Addressable fire alarm system(FP100 series,2189,2100 series)
2. Conventional fire alarm system(2166 series)
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet

Our Services
1.OEM / ODM services.
2.Professional technical team.
3.Offer Free technical support whenever you need
4.Two year warranty and technical maintenance

FAQ 
Q1: Are you manufacturer?
A: (yes)
Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
FM200:  two weeks working day
Fire pump: 25 days
Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after payment received.
Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
Q5: Do you offer OEM service?
A: Yes, we can design the things according to your request.